歡迎來訪濟南共潤科技有限公司官網!

濟南共潤科技有限公司

咨詢服務熱線
0531-88270327 13153168609
當前位置: 首頁 - 新聞中心 >
新聞中心

滾珠絲杠防銹預防措施有哪些?

來源:http://www.phkcgc.live/ 日期:2019-07-17 發布人:admin

  影響金屬腐蝕的主要要素。TBI滾珠絲桿和螺母是碳鋼構造,腐蝕是由各種內在的和外在的要素所惹起的,歸結起來主要有:①金屬資料自身化學成分和構造;②金屬外表光亮度(氧濃度差電池腐蝕);③與金屬外表接觸的溶液成分及pH值;④環境溫度和濕度;⑤與金屬外表相接觸的各種環境介質。

  Main factors affecting metal corrosion. TBI ball screw and nut are carbon steel structure. Corrosion is caused by various internal and external factors. It can be summed up as follows: 1) chemical composition and structure of metal material itself; 2) surface brightness of metal (oxygen concentration difference battery corrosion); 3) solution composition and pH value in contact with metal surface; 4) ambient temperature and humidity. Degree; _Various environmental media in contact with metal surface.
  一,被防銹物的外表預處置
  1. Appearance pre-disposal of rust-proof materials
  1)外表清潔:清洗必需依被防銹物外表的性質和當時的條件,選定恰當的辦法。普通常用的有溶劑清洗法、化學處置清潔法和機械清潔法。
導軌絲杠
  1) Appearance cleaning: Cleaning must be based on the nature of the appearance of the rust-proof material and the conditions at that time, select the appropriate method. The common cleaning methods are solvent cleaning, chemical disposal cleaning and mechanical cleaning.
  2)外表枯燥清洗潔凈后可用過濾的枯燥緊縮空氣吹干,或者用120~170℃的枯燥器停止枯燥,也可用潔凈紗布擦干。
  2) After the appearance is dry and cleaned, it can be dried with filtered dry compressed air, or with a dryer at 120-170 C to stop the drying, or it can be dried with clean gauze.
  二,涂敷防銹油
  2. Coating antirust oil
  1)浸泡法:一些小型物品采用浸泡在防銹油脂中,讓其外表粘附上一層防銹油脂的辦法。油膜厚度可經過控制防銹油脂的溫度或粘度來到達。
  1) Soaking method: Some small articles are soaked in rust-proof grease, so that their appearance is adhered to a layer of rust-proof grease. Oil film thickness can be achieved by controlling the temperature or viscosity of rust-proof grease.
  2)噴霧法一些大型防銹物不能采用浸泡法涂油,普通用大約0.7Mpa壓力的過濾緊縮空氣在空氣清潔中央停止噴涂。噴霧法適用溶劑稀釋型防銹油或薄層防銹油,但必需采用完善的防火和勞動維護措施。
  2) spraying some large antirust substances can not be used to soak the oil, usually with about 0.7Mpa pressure filtration compressed air in the air cleaning center to stop spraying. Spray method is suitable for solvent dilution antirust oil or thin layer antirust oil, but must adopt perfect fire protection and labor maintenance measures.
  3)刷涂法用于不適用浸泡或噴涂的室外建筑設備或特殊外形的制品,刷涂時既要留意不產生堆積,也要留意避免漏涂。
  3) Brushing method is suitable for outdoor construction equipment or products with special shape which are not suitable for immersion or spraying. When brushing, we should pay attention not only to avoid accumulation, but also to avoid leakage.
  以上是導軌絲杠制造商為大家整理的相關內容,想要了解更多內容,歡迎訪問網站:http://www.phkcgc.live
  The above is the relevant content of the guide screw manufacturer for you. For more information, please visit the website: http://www.phkcgc.live.

濟南共潤科技有限責任公司

篮球比分网即时比分直播 买超跑车跑婚庆赚钱吗 支付宝赚钱红包月入过万 sm最赚钱的 魔域老区2018赚钱养号 喜马拉雅有声赚钱 在家里除了微商赚钱的方法 康洁洗衣店赚钱吗 有水有电怎么赚钱 工作室和影楼哪个赚钱 猪八戒网画cad图怎么赚钱 网投买彩票赚钱到底是不是真的 维卡币能赚钱吗 哪个阅读网站最赚钱 推广淘宝优惠券如何赚钱 做无极限能赚钱吗 赚钱笑话一句话